Stencils

Loose Masks...aka "stencils" are designed for repetative useage and have NO adhesive backing, thus must be held in place by hand. These are great for projects which you need high detail but require faster application of a design. These are NOT recommended however for those times when you need a particular area to be "overspray safe" for any extended length of time.

Some designs will be available in multiple piece sets (highly recommended) which can include several different sizes and styles and also most will be available singularly.

Our stencils are unique not only in design shapes, but also material. 
We produce the ONLY airbrush stencils designed specifically for 1/64th scale diecast.  You might call this size "SUB Nano".
All are solvent resistant and VERY THIN, transparent blue, flexible material which will last for a very long time of repeated use while also allowing enough flex for the stencil to conform over moderately curved surfaces, producing tight, crisp, detail edges, while reducing unwanted underspray associated with thicker, more ridged products.

Altho it is certainly possible to do so even with automotive paints, we DO NOT RECOMMEND "CLEANING" these stencils as some of the more intricately detailed designs could be damaged in the process.
For longest use...spray very light coats of paint through the stencils...heavy coats may decrease the stencil's life.
Using 'waterbased' paints will likely present the best opportunity for cleaning success as these paints typically do not require aggressive chemicals for removal, thus may be gently washed off with less effort and/or risk of damage.
In any event, should you attempt to clean your stencils, you do so at your own risk, and FlameMasks.com will not be responsible for damage or decreased performance.

Also these stencils are intended for AIRBRUSH USE only, and are not recommended for those users painting with spray paints/rattlecans. We suggest those users try using "MASKS" instead.